Latest News
The Drytec product had been designed to be a fast fit system, only requiring one trades person for 1st fix installation (electrician). Drytec fits between the 400mm centres of ceiling joists and lies beneath the plasterboard. Fixing it in place is easy, needing no special tools or training. Drytec provides 112w per m2 and has the final answer when it comes to not using wet trades on site and for high speed installation for traditional and modular building styles.
Our original and still the most popular. Developed alongside the University of Stuttgart in 2010, as with all of our infrared surface heating, this provides gentle warmth, evenly across the room with no hot or cold spots.
Thanks to tiny perforations and ‘fluffy’ surface (hence the name) wet plaster, tile cement and screed bleed through the surface to provide a permanent bomd to the substrate. At just 0.4mm thick it can be easily integrated into walls, and ceilings to provide an energy-saving source of radiant heat that can travel up to 3.5m.
It is available in 3 varieties to match the energy requirements of the building:
Moisture Protect, also known as the Fleece S, is purpose-built for fitting in the plaster around window reveals, in order to protect against the build-up of moisture caused by differences in temperature between the inside and outside of a home. Sitting at just 170mm wide, it provides an impressive 145W per m2, making it at outstanding source of natural warmth and one that is perfect for creating more sustainable living spaces.
In historic buildings with narrow, revealed beams, this product sits neatly in between the ceiling joists, solving multiple heating problems
Our P.E.T film is our Fleece product melted between layers of layers of recycled plastic bottle film. Unlike competitors products, this is will NOT delaminate and, when paired with a floor sensor, will not overheat and cause burn damage to timber flooring. Especially designed for under carpets and laminate to protect against damage. It provides an enviable 115W per m2 of radiant warmth.
Addressing the need for low energy heating in offices, schools, shops and anywhere that has a suspended ceiling with 600mm x 600mm ceiling tiles.
If you’re fed up with sitting on top of a fan heater or can’t bear the intense heat from other ’tile heaters’ then these gentle, low energy alternatives not only save energy but also provide constant warmth directly where needed – over tills, desks, counters and so on.
Traditional underfloor heating is very slow to react and therefore requires constant running it also restricts the use of cooling.
Millions of meters of the IDEAL range has been utilised across Europe and is now available in the UK. This clever system can even be installed into the ceiling where it can reduce room temperatures by up to 8° whilst improving the efficiency of heat pumps by up to 25%.
Quickly installed and including a range of options including acoustic and low embodied carbon, this system provides a good alternative to the standard systems.
E-NERGY CARBON uses a 36 V safety extra-low voltage (SELV) with tested and certified power supplies as power supply. There are two options: efficient ring transformers with an efficiency of up to 97% or cost-effective EI transformers for applications with low power requirements.
These intelligent power supplies can handle up to 10 individual rooms and have a built in, visual diagnostic system to alert if there are any problems. The simple traffic light system makes it ideal to deal with ‘false positive’ faults, particularly from tenanted properties
Low energy, low noise, effective and easy to maintain, our Solos and Gemini AirUnits provide low wattage, low noise, high heat Recovery Ventilation around the home with no need for ducting or plant rooms. For more information, follow the link below.
Energy Carbon delivers advanced infrared heating systems designed for modern, energy-efficient homes.
0791 760 8278
© Copyright Energy Carbon Ltd 2025 | Company no. 11341124